Clik here to view.
How to reset RSC password
If you forgot the RSC password for V480, V880, V490, and V890 or other old legacy Sun machines, here are the procedure to reset the password. Requirement: SUNWrsc package If you dont hv the package,...
View ArticleClik here to view.
How To Boot Solaris Cluster into Non-Cluster Mode
Shut down the specific Global Cluster # clnode evacuate <nodename> # cluster shutdown -g0 -y For SPARC, drop system to OK Prompt, then type ‘boot -xs’. ok> boot -xs For X86: - In the GRUB...
View ArticleClik here to view.
Solaris UADMIN commands
uadmin 2 0 sync the filesystems and drops system to ok prompt uadmin 2 1 sync the filesystems and reboots to multi-user mode uadmin 2 2 sync the filesystems and reboots interactively uadmin 2 3 sync...
View ArticleClik here to view.
How to reset the ILOM root password back to the default ‘changeme’ using...
If the root password on the ILOM is currently unknown, but you have root access to the O/S installed, you can change the ILOM password back to the default “changeme”. Follow below steps: # which...
View ArticleClik here to view.
How to bypass and reset the ALOM password for Sun V-Series and Netra Series
How to bypass and reset the ALOM password on Sun Fire V125/V210/V215/V240/V245/V250/V440/V445 and Sun Netra 210/240/440 Servers. Use scadm utility to reset the admin password: # cd /usr/bin/cd...
View ArticleClik here to view.
How to reset/recover Integrated Lights Out Manager (ILOM) password
The default user and password of ILOM is “root/changeme”, but if you hv changed the password already and due for some reason you forgot the password, here are the step by step to revocer the ILOM...
View ArticleClik here to view.
ERROR: Last Trap: Instruction Access Exception
{0} ok boot Boot device: /pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2/disk@0,0:a File and args: Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54. FCode UFS Reader 1.12 00/07/17 15:48:16....
View ArticleClik here to view.
How to Configure SL24 / SL48 with Netbackup
SL24 and SL48 are the Oracle’s entry level of Autoloader/Tape Library. Check here for complete documentation. L24/48 Library are using a single SCSI ID and two logical unit numbers (LUN). LUN 0...
View ArticleClik here to view.
How To replace M4000/M5000 XSCF board
XSCF or eXtended System Control facility unit is known as service processor for M-Series server. The XSCF unit is a cold replacement component. This means the entire server must be powered off and the...
View ArticleClik here to view.
MPT Firmware Fault, code 0800
Getting below error messages during my Sparc M5000 machine boot up: {20} ok boot Boot device: root File and args: MPT Firmware Fault, code 0800 read failed ERROR: FCode Aborted. The file just loaded...
View ArticleClik here to view.
How to Analyze Solaris Crash Dump
Did your Solaris OS suddenly crashed, hang and rebooted by it self for no reason? After initial checking no amber light found on or HW faulty on the server ? its time to check the crash dump log file....
View ArticleClik here to view.
How to Upload Files to Oracle Support
As an old Sun/Oracle upload file method has been discontinued, below are the several method on how to upload files to Oracle Support based on file size. MY ORACLE SUPPORT (MOS) File Upload – 2 GB max...
View ArticleClik here to view.
Hardware Diagnostics for Oracle Sun systems, A Toolkit for System Administrators
The easiest way to diagnose the hardware related problem on Oracle Sun server is by using of OBP OK Prompt commands, the Power On Self Test (POST), and the status LEDs on system boards. ou can diagnose...
View ArticleSetup or configure a TFTP Server on Solaris
This is the procedure on how to setup or configure a TFTP Server on Solaris host. /tftpboot is the default location of tftp, it can be changed through /etc/inetd.conf file. On this below example, lets...
View ArticleBackup, Copy, Cloning mounted disk partition on Solaris
This is how to manual backup, copy or cloning mounted disk partition on Solaris: source: c0t0d0s0 destination:c0t1d0s0 (will be mounted on /mnt/root-backup) *copy the disk partition layout # prtvtoc...
View ArticleHow to create Explorer report with Oracle Explominer Tools
What is Oracle Explorer? The Oracle Explorer Data Collector is a collection of shell scripts and a few binary executable that gathers information and creates a detailed snapshot of a system’s...
View Article